The outside faucet at your Monroe home looked fine all winter. Then you turn it on after a cold spell and water starts dripping around the handle or showing up on the wall below it. Where you see the water, and whether it disappears when you close the faucet, can help us narrow down the problem.
Where the water appears matters
A drip around the handle while the faucet is open gives us a reason to look at the parts that seal around the stem. Water around the hose connection gives us another place to start. If you see moisture inside the house near that wall while the outside faucet runs, shut the outdoor faucet off and leave it off until it can be inspected.
Some frost-resistant faucets shut the water off farther inside the home and drain through the spout when closed. A hose left attached can keep water from draining on some models. If the faucet tube freezes and splits, the leak may only show up when someone opens the faucet again. Woodford’s explanation of how frost-proof faucets work
What we check during an outdoor faucet repair
At Henson Mechanical, we’ll look at the faucet, where water was visible, and the accessible supply connection. If a worn seal or another replaceable part caused the drip, we’ll explain the repair. If the faucet body or the pipe behind it has split, we’ll show you what needs attention and explain what replacing the damaged section involves.
If you’ve already spotted an indoor damp patch, tell us where you saw it when you call. A photo you already have can help us prepare for the visit.
If your outdoor faucet started leaking after a freeze, schedule plumbing service in Monroe, GA.